i-Clamps (IDC) T-Series

T series - for branching a line

Use T-Series connectors when you want to branch off of a common wire run.
Ideal for wiring several fixtures in parallel (such as lighting).
The main line will remain as one length of wire, eliminating junctions at every fixture.
The connector hinges open to allow the wire be run thru the connector, without cutting or stripping the insulation.
Quick and easy connections are made in seconds.
No tape or wire nuts required.
Conductivity is assured for the entire run, since the main line remains uncut.

Specifications:

Example shown below: P/N 8380 used in typical circuit.

PART NUMBER	# of wire runs / taps	WIRE RANGE ( IN / OUT)	COLOR CODE	CURRENT RATING
8380	1 Run / 1 Tap	16-14 AWG (In) / 16 AWG (Out)	Green	15 Amps @ 300 VAC
8381	1 Run / 1 Tap	12-10 AWG (In) / 16-14 AWG (Out)	Yellow	20 Amps @ 300 VAC
8382	1 Run / 1 Tap	12-10 AWG (In) / 14-12 AWG (Out)	Orange	25 Amps @ 300 VAC
8383	1 Run / 1 Tap	16-14 AWG (In) / 22-18 AWG (Out)	Blue	5 Amps @ 300 VAC