i-Clamp, One-Way Series-Installation instructions
One Way Series IDC Connector - Installation Instructions.
Two wire IDC connetor shown. Instructions also apply to three and four wire connectors.
IMPORTANT: Turn off power to the circuit at main circuit breaker or fuse panel. All appropriate electrical codes should be followed on all electrical wiring.
Select the proper i-Clamp based on the wire gauge being spliced. Do not close the top cover before inserting wiring, The i-Clamp can not be opened once closed.
Do not strip wires.
Insert wires into the side until they bottom in the connector. Close the connector by hand and squeeze until the wires are held in place.
Lock the connector using a pair of adjustable pliers.The top cover should be seated onto the base. Once closed, the connection is permanent and is tamper proof.