i-Clamp - IDC Wire Connectors
November 16, 2016
….i-Clamp Insulation Displacement Connectors (IDC) for are the latest additions to Keystone Electronics full line of interconnect components and electronic hardware.
These new devices are UL Listed and provide a quick and reliable method for wire connections without the need to strip wires, use wire nuts or electrical tape. The i-Clamp IDC’s pierce the wire insulation and a make secure connection in one easy step.
Designed for use with 10 – 22 AWG insulated wires, the i-Clamp is available in 3 styles to accommodate all common wire connectivity configurations. The T-Series wire splices are used when you want to branch off a common wire run allowing the wire run to be tapped without cutting or stripping wire insulation.
The Two Way Series connectors have a unique dual channel which allows pre-assembly onto a component or fixture. Once installed, the wiring can be completed by simply attaching the other channel of the clamp to the existing wiring.
The One Way Series for splicing several lines together. Use of this device is more secure than traditional methods of twisting wires together and holding in place with an electrical nut and tape.
Designed to withstand shock and vibration, these connectors have a copper contact housed inside a durable translucent polycarbonate which aids in the visual inspection of the connections. Voltage rating is up to 250 VAC
Learn more about the new UL approved devices
Product samples may be obtained by contacting firstname.lastname@example.org or the nearest Keystone Distributor.